Log In To The S8300 Web Interface From Your Laptop - Avaya G250 Maintenance Manual

Access and login procedures
5. If you log in as craft, you are prompted to suppress alarm origination. Generally you should
accept the default value (yes).
6. Enter your terminal type. Accept the default value, or enter the appropriate type for your
computer. For example, you may use type ntt, a terminal type available for Windows NT4.0
or Windows 98. For Windows 2000, use w2ktt.
7. If prompted for a high-priority session, typically answer n.
The system displays the Telnet prompt. It may take the form <username@devicename>.

Log in to the S8300 Web Interface from your laptop

To run the Web Interface:
1. Open Internet Explorer (5.5 or later) on your computer.
2. In the Address (or Location) field of your browser, type the IP address or name of your
Avaya media server, and press Enter.
If your browser does not have a valid security certificate, you will see a warning screen and
instructions to load the security certificate.
The system displays the Welcome screen.
3. Click the Continue button.
4. Accept the server security certificate to access the Login screen.
The system displays the Login screen.
5. Log in as craft.
The system displays the main menu for the VisAbility™ Management Suite.
6. Click on the link for Launch Maintenance Web Interface.
The system displays the S8300 main menu in the left panel and a usage-agreement notice
in the right window.
7. Check the top of the right panel.
- The Avaya Media Server you are logged into is identified by name and server number.
- The S8300 Media Server number is always 1.
248 Maintenance for the Avaya G250 and Avaya G350 Media Gateways