Avaya G250 Maintenance Manual page 280

Alarms
Configure SNMPv3 authentication
In order to use SNMPv3 authentication, you must create users, groups, and views for the G250/
G350.
The G250/G350 provides several pre-configured views and groups for setting up SNMP
authentication. Refer to
Table 128: G250/G350 pre-configured groups
and how they can be used.
Table 127: G250/G350 pre-configured views
Viewname
snmpv1View
v3ConfigView
restricted
iso
Table 128: G250/G350 pre-configured groups
Group Name
ReadCommG
ReadCommG
WriteCommG
WriteCommG
v3ReadWriteG
v3ReadOnlyG
initial
v3AdminViewG
For a complete discussion of SNMP administration, refer to Administration for the Avaya G250
and Avaya G350 Media Gateways, 03-300436. For the full syntax of SNMP-related commands
and an explanation of their parameters, refer to Avaya G250 and Avaya G350 CLI Reference,
03-300437.
280 Maintenance for the Avaya G250 and Avaya G350 Media Gateways
Table 127: G250/G350 pre-configured views
Description
A view for backwards compatibility with v1 SNMP users, providing
v1 level access only.
A view for an SNMPv3 user with non-administrative privilege.
USM and VACM table access is restricted to changing password
and all download copy config commands.
A view providing limited access to SNMP objects. Access is
restricted to the system, snmp, snmpEngine, snmpMPDStats, and
usmStats subtreees.
A view providing maximal access, for users with admin privileges.
Security Security Level
Model
v1 1 (noAuthNoPriv)
v2 1 (noAuthNoPriv)
v1 1 (noAuthNoPriv)
v2 1 (noAuthNoPriv)
v3 (USM) 3 (AuthPriv)
v3 (USM) 3 (AuthPriv)
v3 (USM) 1 (noAuthNoPriv)
v3 (USM) 3 (AuthPriv)
on page 280 for a description of these objects
Read View Write View
Name Name
snmpv1View
snmpv1View
snmpv1View snmpv1View
snmpv1View snmpv1View
v3configview v3configview
v3configview
restricted restricted
iso iso
on page 280 and
Trap View
Name
snmpv1View
snmpv1View
snmpv1View
snmpv1View
v3configview
v3configview
restricted
iso