G250/G350 component maintenance
6. Apply firm pressure to engage the connectors at the back of the chassis.
The media module connector has different length pins. The long pins engage first to provide
grounding. Medium length and short pins provide power and signal.
7. Lock the media module into the chassis by tightening the spring-loaded captive screws on
the front of the module.
8. Plug in the cables in the correct order (in the reverse of the order in Step 2).
!
WARNING:
To prevent access to electrical hazards by unauthorized personnel and to ensure
WARNING:
continued compliance to international radiated emissions requirements, all
captive screws must be securely tightened such that they cannot be loosened
without the use of a tool.
Figure 1: Inserting Media Modules into the G350
34 Maintenance for the Avaya G250 and Avaya G350 Media Gateways