Avaya G250 Maintenance Manual page 106

Avaya Communication Manager controlled maintenance
Table 36: TEST #35 Battery Feed Test (continued)
Error Test
Code Result
PASS
Any NO
BOARD
106 Maintenance for the Avaya G250 and Avaya G350 Media Gateways
Description/Recommendation
The port's battery feed chip is able to provide sufficient power to the
station equipment to detect on-/off-hook, but may not be able to supply
power for touch-tones.
If touch-tones are inoperative on this station, replace the media module
because this port is inoperative.
Investigate user-reported troubles on this port by running other port
tests, by examining station wiring, or by inspecting the station.
The test could not relate the internal ID to the port (no board). This
result could be due to incorrect translations, no board is inserted, an
incorrect board is inserted, or an insane board is inserted.
Check to make sure that the board translations are correct. Use the list
configuration command, and resolve any problems.
If the board is correctly inserted, use the busy board GGGVS
command.
Use the reset board GGGVS command.
Use the release board GGGVS command.
Use the test board GGGVS long command. This re-establishes the
link between the internal ID and the port.
If this is not the case, check to make sure that a valid board is inserted.
3 of 3