System Technician-Demanded Tests: Descriptions And Error Codes; Primary Signaling Link Hardware Check (#636) - Avaya G250 Maintenance Manual

System Technician-Demanded Tests: Descriptions and Error
Codes
Always investigate tests in the order presented in the table below when inspecting errors in the
system. By clearing error codes associated with the Primary Signaling Link Hardware Check,
for example, you may also clear errors generated from other tests in the testing sequence.
Table 80: Order of Investigation
Order of Investigation

Primary Signaling Link Hardware Check (#636)

Secondary Signaling Link Hardware Check (#639)
Layer 2 Status Test (#647)
Remote Layer 3 Query Test (#637)
D = Destructive; ND = Nondestructive
*
Primary Signaling Link Hardware Check (#636)
The ISDN-PRI Signaling Group D-Channel port depends on the health of the media module on
which it resides. This test will fail if there are problems with either the ISDN-PRI Primary
D-channel port or the MM-DS1 media module. If there are problems with the ISDN-PRI Primary
Signaling Channel port (ISDN-LNK), also investigate the media module.
Table 81: Primary Signaling Link Hardware Check (#636)
Error Test
Code Result
ABORT
1700 ABORT
Description/ Recommendation
Internal system error
Retry the command at 1-minute intervals a maximum of 5 times.
Rollabout video abort. The PRI terminal adapter associated with the
primary D-channel port is detached from the media module. This is a
normal abort when the rollabout video feature is enabled. To complete
test on this port, either:
Re-attach the disconnected PRI terminal adapter, or
Disable the rollabout video feature on this board by entering change ds1
GGGVSpp and set field "Alarm when PRI Endpoint Detached?" to "y."
ISDN-SGR (ISDN-PRI Signaling Group)
Short Test Long Test
Sequence Sequence
X X
X X
X X
X X
Issue 1.1 June 2005
D/ND*
ND
ND
ND
ND
1 of 2
177