Diod-Trk (Diod Trunk) - Avaya G250 Maintenance Manual

Avaya Communication Manager controlled maintenance
Table 67: TEST#17 Station (Digital) Audits Test (continued)
Error Test
Code Result
PASS
Any NO
BOARD

DIOD-TRK (DIOD Trunk)

Table 68: DIOD-TRK (DIOD Trunk)
MO Name (in
Alarm Log)
DIOD-TRK
DIOD-TRK
DIOD-TRK
Note: You must consult local records for the location and designation of the
equipment rack where the G250/G350 is mounted.
A MAJOR alarm on a trunk indicates that alarms on these trunks are not
**
downgraded by the set options command and that at least 75 percent of the
trunks in this trunk group are alarmed.
Many trunk problems are caused by incorrect settings of parameters on the trunk group
administration form. Settings must be compatible with the local environment and with parameter
settings on the far-end. Refer to the Administration Manual for information on how to administer
trunks. For the correct settings for administrable timers and other parameters on a
country-by-country basis, see your local Avaya representative.
160 Maintenance for the Avaya G250 and Avaya G350 Media Gateways
Description/ Recommendation
Station Audits passed. This Digital Port media module is functioning
properly.
If complaints persist, investigate by using other port tests, and by
examining the station, wiring, and connections.
The test could not relate the internal ID to the port.
Check to ensure that the board translations are correct. Translate the
board, if necessary.
Use the busyout board command.
Use the reset board command.
Use the release busy board command.
Use the test board command. This should re-establish the linkage
between the internal ID and the port.
If the problem persists, replace the circuit pack.
Alarm Initial Command to
Level Run*
MAJOR** test port GGGvSpp l
MINOR test port GGGvSpp l
WARNING test port GGGvSpp l
2 of 2
Full Name of MO
DIOD Trunk
DIOD Trunk
DIOD Trunk