Quality Adjustment; Adjusting Copy Density: Density Setting - Konica Minolta bizhub PRESS 1250 User Manual

6.3

Quality Adjustment

6.3 Quality Adjustment
Use this function to adjust the density level of copy images. Also, adjust the copy quality by specifying the
original image type.
6.3.1

Adjusting Copy Density: Density Setting

[AES] (Automatic Exposure Selection) operates with the default settings. When scanning multiple originals
having differences in image density, it detects the density level of each original image and automatically se-
lects the appropriate exposure for copy.
Manually adjust the density level to make copies darker or lighter than the original.
Additionally, the following adjustments are provided:
-
Density by Original Type: Shift each of 9 density levels provided in Density Setting to three levels darker
or three levels lighter. This setting can be made to use in combination with each of 4 Original Type
modes.
-
Preset Density Recall: Program a combination of Original Type, Density Setting, and Background Re-
moval specified as desired. This setting can be made for the two keys provided on the screen.
-
Photo Mode Density Selection: Specify the density level to be selected by AES in Photo mode.
-
Image Density Selection: Change the range of the density level between the darkest and lightest that
can be specified in the Density Setting. Use this setting, for example, to obtain a lighter image overall
without degrading the image quality. This setting is also effective when using Density by Original Type.
Original
d
Reference
The four density adjustments (Density by Original Type, Preset Density Recall, Photo Mode Density Selection,
and Image Density Selection) are provided in [Function Setting] on the Utility menu. For details, see Section
7 of the POD Administrator's Reference.
1
Position the original.
2
Press [COPY] tab to display the Copy Screen.
3
Select the desired density level using the setting keys provided under [Quality Adj.]
bizhub PRESS 1250/1052
Output
6
6-20