Erasing Outside Of Original (Non-Image Area Erase); To Set Non-Image Area Erase Function; Non-Image Area Erase - Konica Minolta bizhub pro 920 Copier Manual

11

11.16 Erasing Outside of Original (Non-Image Area Erase)

The Non-Image Area Erase mode is used to copy non standard or special
originals, such as books, magazines, paste-ups, graphs, thick or thin mate-
rials, etc. from the original glass. The exposed glass area outside the borders
of the original will not be copied.
Note
This function may not operate properly if the lighting in the work place is
directly over the original glass. In this case, consult your service repre-
sentative about an appropriate place for installation.

To set Non-Image Area Erase function

0 Use the original glass only. Keep ADF open throughout the procedure.
0 Original size should be larger than 10 mm × 10 mm.
0 Auto Zoom and Auto Paper Select are automatically released.
0 Copy mode is automatically set to 1-1. When selecting 1-2 mode, Sepa-
rate Scan mode will function automatically.
11-56
Applications
General copying

Non-Image Area Erase

bizhub PRO 920