Useful Functions; Panel Resetting; Auto Panel Reset; Energy Save Mode - Konica Minolta Di1610 User Manual

3
3.6

Useful Functions

Panel Resetting

Press the [Panel Reset] key to return all modes and functions (zoom ratio,
number of copies, etc.) to their defaults. (All selected settings are
canceled.)
Tip
The [Panel Reset] key comes in handy for canceling all selected
settings at one time.
To avoid accidentally using settings from the previous copy job, press
the [Panel Reset] key to return all functions and settings to their
defaults before specifying any settings for your current job.

Auto Panel Reset

Even if the [Panel Reset] key is not pressed, the machine automatically
resets all functions and settings to their defaults 1 min after a copy cycle
has been completed or a key operation is performed.
Tip
The length of time before the machine automatically resets itself can
be set between 1 min and 5 min in addition to 30 seconds. The Auto
Panel Reset function can even be disabled.
For more details, refer to "Specifying the Setting for "AUTO PANEL
RESET"" on page 5-4.

Energy Save Mode

Instead of turning off the machine, it can be set into a standby state
(Energy Save mode).
If the machine is not used for a set length of time, it will automatically enter
the Energy Save mode. The default length of time is 15 min.
To cancel the Energy Save mode, press any key on the control panel.
Tip
The length of time before the machine enters the Energy Save mode
can be set between 1 min and 240 min.
For more details, refer to "Specifying the Setting for "ENERGY SAVE
MODE"" on page 5-5.
3-12
Before Making Copies
Di1610/Di1610p