Reserve; Set Reserve Job - Konica Minolta Di5510 User Manual

Basic Operations

Reserve

Set Reserve Job

The Reserve function allows you to set up a new job while a current (scan/print) job is in
process. When the current job is finished, the Reserve job starts printing immediately.
The FREE JOB key on the screen is touch sensitive and active only when another job is in
progress; otherwise it appears grayed out.
❒ Job settings: Max. 10 (current job plus 9 reserve jobs)
❒ The reserve job is available to be set after the copier starts to scan the current job. When setting
more than one reserve job, the next reserve job setting will be available after the copier starts to
scan for the previous reserve job.
When the current job is under Store mode, Image insert, or Book copy, the reserve job setting will
be available after the copier starts to print the current job.
❒ If certain conditions occur while a reserve job is being set, such as activation of Interrupt mode,
mishandled paper, or depletion of paper, the current printing job will cease and the FREE JOB
indicator on the screen will be replaced by INTERRUPT, JAM or ADD PAPER, as appropriate.
Perform the required measure for the situation at hand.
❒ The order of the reserve jobs can be altered on the Job Status Screen.
❒ The reserve jobs can be deleted on the Job Status Screen.
❒ Incompatible Basic Copy Conditions: Interrupt copying, Scanning in Store mode, Proof copy
❒ Incompatible Special original: None
❒ Incompatible Applications: Storing image in Overlay Memory
Basic Screen: reserve job available
6-28
Reserve Job Setting Screen