Pri Software Implementation - Nortel 1000 Installation And Commissioning Manual

272 2.0 Mb PRI implementation
Table 101
NTBK05DA pinouts
From:
50-pin MDF
connector
pin 23
pin 48
pin 50
pin 24
pin 49
pin 25
NTBK05CA pinouts
The pinouts for the NTBK05CA cable are as follows:
Table 102
NTBK05CA pinouts
From:
50-pin MDF
connector
pin 23
pin 48
pin 24
pin 49
pin 21
pin 46

PRI software implementation

The following information describes the process required to program basic
2.0 Mb PRI on the system.
PRI cards must be configured before defining the DCH links or PRI
applications.
Prompts which do not show a response are left as default. For more
information on any of these prompts, refer to Software Input Output
Administration (NN43001-611).
Task summary
Copyright © 2003-2007, Nortel Networks
.
To:
9-pin connector
pin 6
pin 7
pin 9
pin 2
pin 3
pin 5
To:
Transmit coax
connector
Inner conductor
outer conductor
—
—
—
—
Note: Before installing PRI cards in IP expansion cabinets or Media
Gateway systems, configure them for IP connectivity. Refer to LD 117
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
color Signal
Black R0
White T0
Bare R0/T0 FGND
Black R1
Red T1
Bare R1/T1 FGND
To:
Receive coax
connector
—
—
Inner conductor
outer conductor
—
—
To:
50-pin MDF
connector
—
—
—
—
pin 49
pin 48