Nortel 1000 Installation And Commissioning Manual page 254

254 2.0 Mb DTI implementation
Prompt Response
ROUT
0-511
0-127
TKTP
TIE
COT
DID
RCLS (EXT)
INT
DTRK
(NO)
YES
DGTP DTI2
...
NCNA YES (NO)
NCRD YES (NO)
PTYP
(ATT)
AST
AOT
DTT
DCT
DST
AUTO YES (NO)
ICOG IAO
ICT
OGT
SRCH (LIN)
RRB
xxxx
ACOD
TARG 1-15
OABS 0-9
INST (0)-999
CNTL (NO) YES
Copyright © 2003-2007, Nortel Networks
.
Description
Route number
Range for Large System and CS 1000E system.
Range for Meridian 1 Small System, Media Gateway 1000B.
Service routes allowed with ISDN.
TIE trunk route.
Central office trunk.
Direct Inward Dial trunk.
Class marked route as Internal or External.
Digital trunk route.
Analog.
Digital.
Select a digital trunk type of 2.0 Mb DTI.
Network Call Name is (is not) allowed.
Network Call Redirection. Allows network call redirection
messages to be sent (or blocks messages if NCRD=no).
Port type at far-end:
Analog TIE trunk routes:
Analog TIE trunk.
Analogue satellite system TIE trunk or ESN satellite
Meridian SL-1 TIE trunk.
Analogue TIE trunk, used instead of ATT whenever the system
has one or more digital satellite trunk routes (DST) to any digital
satellite system which includes OPX sets.
Digital TIE trunk routes:
Digital TIE trunk.
Combination digital TIE trunk.
Digital satellite system TIE trunk.
Auto-terminate must be NO if response to DSEL is VOD.
Incoming and outgoing trunk.
Incoming trunk.
Outgoing trunk.
Linear search, or round-robin search, used for outgoing trunks.
Trunk route access code.
Trunk access restriction group for routes.
Outgoing digit(s) to be absorbed.
Digits to be inserted.
Changes to controls or timers.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007