Nortel 1000 Installation And Commissioning Manual page 81

Table 21
Protocol selection switch settings
Protocol
DPNSS1
ISDN
Valid switch combinations
The following are the only allowable switch setting combinations (not
including address switch settings).
Port 0
Port 0 can be configured as asynchronous ESDI, or disabled. If the port is
configured as disabled, it will not be visible to the system CPU. Refer to
Table 22 "Port 0 settings" (page
Table 22
Port 0 settings
Mode
Asynchronous ESDI
Asynchronous ESDI
Port disabled
Port 1
The following are the only valid emulation mode combinations. If the port
is configured as disabled, it will not be visible to the system CPU. Refer to
Table 23 "Port 1 settings" (page
Table 23
Port 1 settings
Mode
DPNSS1
ISDN
Expanded
DPNSS1
Port disabled
Copyright © 2003-2007, Nortel Networks
.
Set up the NT6D11AB, NT6D11AE, NT6D11AF DCHI 81
Note: The ISDN emulation must be selected.
Emulates
NT5K35
NT6D11
NT5K75
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
Switch Setting
SW3.1
0
1
81).
Switch setting
SW1.1 SW1.2
1 0
1 0
1 1
81).
SW2.1
0
0
0
1
SW3.2
0
1
SW3.1 SW3.2
0 0
1 1
- -
Switch setting
SW2.2 SW3.1 SW3.2
0 0 0
0 1 1
1 0 0
1 - -