2.0 Mb Dti Implementation; Contents; Overview; Hardware Requirements - Nortel 1000 Installation And Commissioning Manual

2.0 Mb DTI implementation

Contents

This section contains information on the following topics:
"Overview" (page 237)
"Hardware requirements" (page 237)
"NTAK10 2.0 Mb DTI card" (page 238)
"Install DTI hardware" (page 238)
"DTI software implementation" (page 241)

Overview

This chapter provides the information required to install the 2.0 Mb Digital
Trunk Interface (DTI) card in a system. It includes information for:
•
•

Hardware requirements

Hardware requirements for 2.0 Mb DTI are as follows:
•
•
•
Copyright © 2003-2007, Nortel Networks
.
hardware installation
software implementation
2.0 Mb DTI Circuit card - NTAK10
(a Clock Controller is incorporated into the circuit card)
CEPT Cable – NTBK05DA (120
CEPT Cable – NTBK05CA (75
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
3 / twisted pair – 6.15 m length)
4
3 / coaxial – 6.15 m length)
4
237