Hardware Description - Nortel 1000 Installation And Commissioning Manual

Isdn primary rate interface
Table of Contents

Advertisement

258 2.0 Mb PRI implementation
Circuit card
NTAK79
NTAK20
NTAK93
NTBK51
Cables
One of the following cables is required for a PRI connection:

Hardware description

2.0 Mb PRI cards
Two PRI cards are available on the system:
The difference between the two PRI cards is that the NTBK50, when
equipped with the NTBK51 D-channel daughterboard, can download
software onto the card. This feature is based on the MSDL platform and
Copyright © 2003-2007, Nortel Networks
.
CEPT Cable - NTBK05DA (120
CEPT Cable - NTBK05CA (75
length)
NTAK79 2.0 Mb PRI card
NTBK50 2.0 Mb PRI card
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
Description
2.0 Mb PRI circuit card.
Supports an onboard clock controller and an
onboard D-channel handler interface.
Clock-controller daughterboard. The system
supports only one active clock controller per
system or IP expansion cabinet.
Note: Every cabinet or Media Gateway that
contains a digital trunk must contain a clock
controller.
Connects to the NTBK50 PRI card.
D-channel-handler interface (DCHI)
daughterboard.
Connects to the NTBK50 PRI card.
Downloadable D-channel daughterboard
(DDCH).
Connects to the NTBK50 PRI card.
1
/
twisted pair—6.15 m length), or
2
1
/
Ensure the document title is correct. m
2

Advertisement

Table of Contents
loading

Table of Contents