Nortel 1000 Installation And Commissioning Manual page 277

Prompt Response
LD 14 - Defining service channels and PRI trunks
Prompt Response
REQ NEW
CHG
TYPE TIE
TN l ch
RTMB
0-511 1-4000
0-127 1-4000
...
LD 73 - Defining system timers and clock controller parameters
Prompt Response
REQ CHG
TYPE PRI2
FEAT SYTI
xx
CCO
PREF CCO xx
SREF CCO xx
CC1 xx
xx
PREF CC1
xx
SREF CC1
CC2 xx
xx
PREF CC2
xx
SREF CC2
xx
CC3
Copyright © 2003-2007, Nortel Networks
.
Description
On an existing ESN network, setting this prompt to "YES"
may also require modifying the Digit Manipulation Index (DMI)
associated with this route at the far-end (so the Access Code is
not reinserted twice). The INSERT prompt (INST) is bypassed if
INAC = YES.
Description
Add new data.
Change existing data.
Note: When assigning several members at once use the multiple
create command NEW XX.
TIE trunk only, allowed between MSL-1.
Loop and channel for digital trunks
Route number and Member number
Range for Large System and CS 1000E system.
Range for Meridian 1 Small System, Media Gateway 1000B,
Description
Change data.
2.0 Mb PRI.
System timers.
Card slot number for Clock Controller 0.
Card number of PRI/DTI/SILC containing the primary clock
reference for the main cabinet
Card number of PRI/DTI/SILC containing the primary clock
reference for the main cabinet
Card number for Clock Controller 1.
Primary Reference DTI/PRI loop for Clock controller one.
Primary Reference DTI/PRI loop for Clock controller one.
Card number for Clock Controller 2.
Card number of PRI/DTI/SILC or DTI2/PRI2/SILC containing the
primary clock reference.
Card number of PRI/DTI/SILC or DTI2/PRI2/SILC containing the
primary clock reference.
Card number for Clock Controller 3.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
PRI software implementation 277