Nortel 1000 Installation And Commissioning Manual page 234

234 1.5 Mb ISL implementation
Prompt Response
TRSH 0-15
RALM 1-(3)-128
BIPC 1-(2)-128
LFAC 1-(3)-128
BIPV 1-(3)-4
1-(2)-4
SRTK 1-(5)-24
1-(30)-3600
SRNT 1-(15)1024
1-(3)-1024
LFAL 1-(17)-10240
1-(511)-10240
SRIM (1)-127
SRMM 1-(2)-127
LD 15 - Enabling ISDN option
Prompt Response
REQ: NEW CHG
TYPE: NET
0-99
CUST
0-31
ISDN YES
1-32700
PNI
HNPA NPA
HNXX NXX
HLOC XXX
LSC 1-9999
Copyright © 2003-2007, Nortel Networks
.
Description
Assign a threshold set or table.
Yellow alarm 24-hour threshold.
24-hour bit rate violation threshold.
24-hour loss of frame alignment threshold.
Bit rate (bipolar violation and CRC) monitoring limits for
maintenance and out-of-service thresholds.
Frame slip-tracking-monitoring limits (in hours).
Non-tracking slip-rate monitoring maintenance and
out-of-service thresholds.
Loss of frame alignment monitoring limits.
Slip rate improvement timer.
Maximum number of times the slip rate exceeds the
maintenance limit.
Description
Add new data. Change existing data.
Networking data.
Customer number Range for Large System, Call Server
1000E, and Media Gateway 1000E
Range for Small System, Media Gateway 1000B
Customer is equipped with ISDN.
Customer private network identifier. This number MUST be
unique to this customer in the private network. It is used to
as part of the setup message for feature operation such as
Network Ring Again and Network ACD.
Telephone area code for this system. Sent as part of setup
message as calling line identification.
Telephone local exchange code for this system. Sent as
part of setup message as calling line identification.
Home location code (NARS).
One to four digit Local Steering Code established in the
Coordinated Dialing Plan (CDP). The LSC prompt is
required for Calling Line I.D. and Network ACD.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007