Nortel 1000 Installation And Commissioning Manual page 47

Figure 15
NTCK80AA/AB/AC/AD
Cable diagrams
Figure 16 "DDP2 cable for systems with an I/O panel" (page 48)
Figure 17 "DDP2 cable for systems without an I/O panel" (page 49)
examples of typical cabling configurations for the DDP2.
Figure 16 "DDP2 cable for systems with an I/O panel" (page 48)
typical DDP2 cabling for a system with an I/O panel, with the connection
between the I/O panel and a Network Channel Terminating Equipment
(NCTE).
Figure 17 "DDP2 cable for systems without an I/O panel" (page 49)
cabling for a system without an I/O panel. Here, the DDP2 faceplate is
cabled directly to the NCTE.
Copyright © 2003-2007, Nortel Networks
.
Note: Since several clock cabling options exist, none has been
represented in the diagrams. Refer to
52) for a description on each available option.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
NT5D97 Dual-port DTI2/PRI2 card 47
"Clock configurations" (page
and
provide
shows a
shows