Nortel 1000 Installation And Commissioning Manual page 291

Prompt
N201
K
LD 15 - Enable the ISDN option
Prompt Response
REQ: NEW
CHG
TYPE: NET
0-99
CUST
0-31
ISDN YES
1-32700
PNI
HNPA NPA
HNXX NXX
HLOC XXX
1-9999
LSC
AC2
NPA
NXX
INTL
SPN
LOC
Copyright © 2003-2007, Nortel Networks
.
Response
4(260)
1-(7)-32
Description
Add new data.
Change existing data.
Networking data.
Customer number
Range for Large System, Call Server 1000E, and Media
Gateway
1000E
Range for Small System, Media Gateway 1000B,
Customer is equipped with ISDN.
Customer private network identifier. MUST be unique to
this customer in the private network. Used as part of the
setup message for feature operation such as Network Ring
Again and Network ACD.
Telephone area code for this system. Sent as part of setup
message as CLID.
Telephone local exchange code for this system. Sent as
part of setup message for calling line identification.
Home location code (NARS).
One to four digit Local Steering Code established in the
Coordinated Dialing Plan (CDP). The LSC prompt is
required for Calling Line ID and Network ACD.
Access Code 2. Enter call types (type of number) that use
access code 2. Multiple responses are permitted. This
prompt only appears on NARS equipped systems. If a call
type is not entered here, it is automatically defaulted to
access code 1.
E.164 National.
E.164 Subscriber.
International.
Special Number.
Location Code.
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
ISL software implementation 291
Description
Maximum number of octets in information
field.
Maximum number of outstanding
unacknowledged frames (NAKS).