Show Vlanauthorization; Show Vlanauthorization Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

Mode
Switch command, read‐write.
Example
This example show how to clear VLAN authorization for all ports on slots 3, 4, and 5:
D2(rw)->clear vlanauthorization ge.3-5.*

show vlanauthorization

Displays the VLAN authentication status and configuration information for the specified ports.
Syntax
show vlanauthorization [port-string]
Parameters
port‐string
Defaults
If no port string is entered, the status for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This command shows how to display VLAN authorization status for ge.1.1:
G3(su)‐>show vlanauthorization ge.1.1
Vlan Authorization: ‐ enabled
port
-------
ge.1.1
Table 15‐50 provides an explanation of command output. For details on enabling and assigning
protocol and egress attributes, refer to "set vlanauthorization" on page
vlanauthorization egress" on page 15‐44.
Table 15-50 show vlanauthorization Output Details
Output Field
port
status
administrative
egress
operational egress
(Optional) Displays VLAN authentication status for the specified ports. If
no port string is entered, then the global status of the setting is displayed.
For a detailed description of possible port‐string values, refer to "Port
String Syntax Used in the CLI" on page 4‐1.
status administrative
egress
-------- --------------
enabled untagged
What It Displays...
Port identification
Port status as assigned by set vlanauthorization command
Port status as assigned by the set vlanauthorization egress command
Port operational status of vlanauthorization egress.
operational authenticated
egress mac address
----------- -----------------
show vlanauthorization
vlan id
-------
15‐43 and "set
D-Series CLI Reference 15-45