Show Multiauth Station; Show Multiauth Session - Enterasys D2 D2G124-12P Cli Reference Manual

show multiauth station

show multiauth station
Use this command to display multiple authentication station (end user) entries.
Syntax
show multiauth station [mac address] [port port-string]
Parameters
mac address
port port‐string
Mode
Switch command, read‐only.
Defaults
If no options are specified, multiple authentication station entries will be displayed for all MAC
addresses and ports.
Example
This example shows how to display multiple authentication station entries. In this case, two end
user MAC addresses are shown:
D2(rw)->show multiauth station
Port
------------ ------------
ge.1.20
ge.2.16

show multiauth session

Use this command to display multiple authentication session entries.
Syntax
show multiauth session [all] [agent {dot1x | mac | pwa}] [mac address]
[port port-string]
Parameters
all
agent dot1x | mac|
pwa
mac address
port port‐string
15-36 Security Configuration
(Optional) Displays multiple authentication station entries for specific MAC
address(es).
(Optional) Displays multiple authentication station entries for specific
port(s).
Address type Address
------------------------
mac 00-10-a4-9e-24-87
mac 00-b0-d0-e5-0c-d0
(Optional) Displays information about all sessions, including those with
terminated status.
(Optional) Displays 802.1X, or MAC, or port web authentication session
information.
(Optional) Displays multiple authentication session entries for specific
MAC address(es).
(Optional) Displays multiple authentication session entries for the
specified port or ports.