Set Rmon Stats - Enterasys D2 D2G124-12P Cli Reference Manual

set rmon stats

Example
This example shows how to display RMON statistics for Gigabit Ethernet port 1 in switch 1.
D2(su)->show rmon stats ge.1.1
:
Port: ge.1.1
-------------------------------------
Index
Owner
Data Source
Drop Events
Collisions
Jabbers
Broadcast Pkts
Multicast Pkts
CRC Errors
Undersize Pkts
Oversize Pkts
Fragments
Table 13‐44 provides an explanation of the command output.
set rmon stats
Use this command to configure an RMON statistics entry.
Syntax
set rmon stats index port-string [owner]
Parameters
index
port‐string
owner
Defaults
If owner is not specified, monitor will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to configure RMON statistics entry 2 for
D2(rw)->set rmon stats 2 ge.1.20
13-4 RMON Configuration
= 1
= monitor
= ifIndex.1
= 0 Packets
= 0 Octets
= 0 0 - 64 Octets
= 0 65 - 127 Octets
= 0 128 - 255 Octets
= 0 256 - 511 Octets
= 0 512 - 1023 Octets
= 0 1024 - 1518 Octets
= 0
Specifies an index for this statistics entry.
Specifies port(s) to which this entry will be assigned.
(Optional) Assigns an owner for this entry.
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
ge
.1.20: