Show Cos Unit; Clear Cos All-Entries - Enterasys D2 D2G124-12P Cli Reference Manual

show cos unit

show cos unit
Use this command to show possible CoS unit entries.
Syntax
show cos unit
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows possible unit entries for inbound rate limiting
D2(su)->show cos unit
Type:
irl = inbound rate limiting
Port Type
---------
0

clear cos all-entries

Use this command to clear all Class of Service entries except entries 0‐7.
Syntax
clear cos all-entries
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the CoS configuration for all entries except entries 0‐7:
D2(su)->clear cos all-entries
9-30 Policy Classification Configuration
Type Unit Maximum Rate
---- ---- ------------
irl Kbps 1000000
Unit:
Kbps = Kilobits per second
Minimum Rate Granularity
------------ -----------
512 1
: