Show Spantree Bpdu-Forwarding; Set Spantree Bpdu-Forwarding - Enterasys D2 D2G124-12P Cli Reference Manual

Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the Spanning Tree version:
D2(su)->clear spantree version

show spantree bpdu-forwarding

Use this command to display the Spanning Tree BPDU forwarding mode.
Syntax
show spantree bpdu-forwarding
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the Spanning Tree BPDU forwarding mode:
D2(su)->show spantree bpdu-forwarding
BPDU forwarding is disabled.

set spantree bpdu-forwarding

Use this command to enable or disable Spanning Tree BPDU forwarding. By default BPDU
forwarding is disabled.
Syntax
set spantree bpdu-forwarding {disable | enable}
Parameters
disable | enable Disables or enables BPDU forwarding;.
show spantree bpdu-forwarding
D-Series CLI Reference 6-9