Clear Snmp Notifyprofile - Enterasys D2 D2G124-12P Cli Reference Manual

clear snmp notifyprofile

Parameters
profile
targetparam
targetparam
volatile |
nonvolatile
Defaults
If storage type is not specified, nonvolatile (permanent) will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to create an SNMP notify profile named area51
parameters entry.
D2(su)->set snmp notifyprofile area51 targetparam v3ExampleParams
clear snmp notifyprofile
Use this command to delete an SNMP notify profile configuration.
Syntax
clear snmp notifyprofile profile targetparam targetparam
Parameters
profile
targetparam
targetparam
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete SNMP notify profile "area51":
D2(su)->clear snmp notifyprofile area51 targetparam v3ExampleParams
5-36 SNMP Configuration
Specifies an SNMP filter notify name.
Specifies an associated entry in the SNMP Target Params Table.
(Optional) Specifies a storage type.
Specifies an SNMP filter notify name to delete.
Specifies an associated entry in the snmpTargetParamsTable.
and associate a target