Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete the community name "vip."
D2(su)->clear snmp community vip
Configuring SNMP Access Rights
Purpose
To review and configure SNMP access rights, assigning viewing privileges and security levels to
SNMP user groups.
Commands
For information about...
show snmp access
set snmp access
clear snmp access
show snmp access
Use this command to display access rights and security levels configured for SNMP one or more
groups.
Syntax
show snmp access [groupname] [security-model {v1 | v2c | usm}] [noauthentication
| authentication | privacy] [context context] [volatile | nonvolatile | read-only]
Parameters
groupname
security‐model v1 |
v2c | usm
noauthentication |
authentication |
privacy
context context
(Optional) Displays access information for a specific SNMPv3 group.
(Optional) Displays access information for SNMP security model version
1, 2c or 3 (usm).
(Optional) Displays access information for a specific security level.
(Optional) Displays access information for a specific context. For a
description of how to specify SNMP contexts, refer to "Using SNMP
Contexts to Access Specific MIBs" on page 5‐3.
Configuring SNMP Access Rights
Refer to page...
5-15
5-17
5-18
D-Series CLI Reference 5-15