Netware Configuration; Installing The Nib Setup Tool; Installing Printer Manager For Administrator - Ricoh AP2600N User Manual

4. NetWare Configuration

This chapter describes how to configure the printer to use as a print server or a
remote printer in a NetWare environment.
Note
❒ NetWare must be set to active using the operation panel of the printer. For
more information about how to set it, see the "Setup Guide" that comes with
the printer.

Installing the NIB Setup Tool

A utility called the NIB Setup Tool is provided to configure the printer to work
in a network environment. This section describes how to install PRINTER MAN-
AGER FOR ADMINISTRATOR, and how to run the NIB Setup Tool.
Limitation
❒ The NIB Setup Tool is supported to work with the following operating sys-
tems.
• Microsoft Windows 95/98/Me
• Microsoft Windows 2000
• Microsoft Windows NT 4.0

Installing PRINTER MANAGER FOR ADMINISTRATOR

Follow these steps to install PRINTER MANAGER FOR ADMINISTRATOR.
Preparation
You should install PRINTER MANAGER FOR ADMINISTRATOR on the
computer. If you install PRINTER MANAGER FOR ADMINISTRATOR from
a file server or run it via the network, PRINTER MANAGER FOR ADMINIS-
TRATOR might not work correctly.
Be sure to close all applications before starting the installation procedure.
A
Close all the applications that are currently running.
B
Insert the CD-ROM labeled "Printer Drivers and Utilities" into the CD-
ROM drive.
If the installer starts automatically, follow the instructions on the screen.
If not, go to step C.
C
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
D
On the [Install/Uninstall] tab, click [Install].
49