Nortel Meridian Meridian 1 Feature Description And Administration page 1247

Meridian Mail Trunk Access Restriction
Transfer
Analog (500/2500 type) Set
Set A is an Analog (500/2500 type) set with a XFA Class of Service (transfer
and three/six party conference allowed).
1 An incoming or outgoing external call is established between Set A and
Set B, an external party.
2 Set A performs a switchhook flash that puts Set B on hold.
3 Set A dials Set C. Set C has either Call Forward All Calls to Meridian
Mail enabled or is a Meridian Mail DN.
4 Before or after the Meridian Mail has answered, Set A attempts to
transfer Set B to Meridian Mail by going on-hook.
5 This attempt is treated as an illegal transfer. Set A is re-rung and
reconnected with Set B when going off-hook.
Conference
Analog (500/2500 type) Set
Set A is an Analog (500/2500 type) set with a XFA Class of Service (transfer
and three/six party conference allowed).
1 An incoming or outgoing external call is established between Set A and
Set B, an external party.
2 Set A performs a switch hook flash that puts Set B on hold.
3 Set A dials Set C. Set C has either Call Forward All Calls to Meridian
Mail enabled or is a Meridian Mail DN.
4 Before or after the Meridian Mail has answered, Set A attempts to
conference Set B to Meridian Mail by performing another switchhook
flash.
5 The conference is not permitted. Set A is reconnected to Set B. The call
to Meridian Mail is disconnected.
Set A is an Analog (500/2500 type) set with a TSA Class of Service (three
party service allowed).
1 An incoming or outgoing external call is established between Set A and
Set B, an external party.
2 Set A perform a switch hook flash that puts Set B on hold.
International ISDN PRI Feature description and administration
Page 1247 of 1814