Feature Implementation; Task Summary List - Nortel Meridian Meridian 1 Feature Description And Administration

Feature implementation

Task summary list

ISDN QSIG Call Diversion Notification Enhancements
• Multi-purpose Serial Data Link (MSDL) package 222
• Q-reference Signaling Point Interface (QSIG) package 263
• QSIG Generic Functional Protocol Transport (QSIG-GF) package 305
• Q-reference Signaling Point Interface Supplementary Services
(QSIG-SS) package 316
For ISDN Basic Rate Interface Trunking (BRIT), the following additional
packages are required:
• ISDN Basic rate Access (BRI) 216
• ISDN Basic Rate Trunk Access (BRIT) package 233
For a QSIG/DPNSS1 Gateway, the following additional packages are
required:
• Integrated Digital Access (IDA) package 122
• Digital Private Networking Signaling System No. 1 (DPNSS) 123
• DPNSS Network Services (DNWK) package 231
For notification display, the following additional packages are required:
• Digit Display (DDSP) 19
• Call Party Name Display (CPND) package 95
The following is a summary of the tasks in this section:
1 LD 17 – Configure or remove remote capabilities D-Channel for QSIG
Call Diversion Notification.
2 LD 10 – Configure QSIG Diversion Notification Class of Service, on
analog (500/2500 type) sets.
3 LD 11 – Configure QSIG Diversion Notification Class of Service, on
Meridian 1 proprietary sets.
International ISDN PRI Feature description and administration
Page 985 of 1814