Nortel Meridian Meridian 1 Feature Description And Administration page 1345

LD 16 – Allow Network Call Redirection.
Prompt Response
REQ CHG
TYPE RDB
CUST xx
ROUT 0-511
...
NCNA (NO) YES
NCRD (NO) YES
TRO (NO) YES
LD 95 – Display the reason calls are redirected.
Prompt Response
REQ CHG
TYPE CPND
CUST xx
ROUT 0-511
...
Network Call Redirection
Description
Change.
Route Data Block.
Customer Number.
Route Number.
Network Call Name is (is not) allowed.
Network Call Redirection. Allows network call redirection
messages to be sent (or blocks messages if NCRD= NO)
Network Call Redirection can occur without answering YES
to the NCRD prompt. This prompt only controls the sending
of Network Call Redirection messages, not the actual
redirection of the call. The message supplied when NCRD =
yes provides the information for the CLID display. When
NCRD is NO, the call is redirected without the CLID
redirection information.
Trunk Optimization
TRO economizes trunk use throughout the network as part
of the NCRD feature.
Description
Change.
Call Party Name Display data block.
Customer number.
Route Number.
International ISDN PRI Feature description and administration
Page 1345 of 1814