Nortel Meridian Meridian 1 Feature Description And Administration page 1369

Network Intercom (Hot Type D and Hot Type I Enhancements)
KEY nn HOT D dd
target_num hot_dn
R
V
N
(H)
KEY nn HOT I dd
target_number
(V)
N
R
LD 95 – Configure the Calling Party Name Display
Prompt Response
REQ NEW
CHG
TYPE CPND
CUST xx
...
- NITC aaaa (NI)
Feature operation
Two-way Hot Line type D Key.
nn = key number.
dd = number of digits dialed.
target_number = terminating DN (31 digits maximum).
Hot_dn = two-way Hot Line DN.
Termination mode:
Ringing
Voice
Non-ringing
Hot Line
Hot Line type I key.
nn = key number.
dd = number of digits dialed.
target_number = terminating DN (31 digits maximum).
Termination mode:
Voice
Non-ringing
Ringing
Description
Add new data.
Change existing data.
Calling Party Name Display.
Customer number.
Non-Hot Line call. Indicates that the Hot Line call
terminated as a normal call.
Press the Hot Type I or D key to initiate a Hot Line call to a target DN (the
DN may be an external DN in an MCDN ISDN network).The called party
answers the call by pressing their Hot Type I or D key if configured. If the
called party has no Hot Type I or D key configured, the call will behave as a
normal call and is answered accordingly.
International ISDN PRI Feature description and administration
Page 1369 of 1814