Nortel Meridian Meridian 1 Feature Description And Administration page 1436

Page 1436 of 1814
553-2901-301 Standard 9.00 January 2002
Network Break-in and Force Disconnect
Table 96
Post-dial network break-in operation for an analog (500/2500 type)
telephone (Part 2 of 2)
Actions
Set A presses the Flash key
and dials the PONW FFC code.
If Set C disconnects
If Set B disconnects
Pre-dial operation for analog (500/2500 type) telephones
Table 97 shows the post-dial network break-in operation for analog
(500/2500 type) telephones.
Table 97
Pre-dial network break-in operation for an analog (500/2500 type)
telephone
Actions
Sets B and C are involved in a
two-party call.
Set A dials the PONW FFC and
then Set B's DN.
If Set C disconnects
If Set B disconnects
Response
Set A enters into a Conference with
Sets B and C. If configured, a warning
tone is provided to all three parties.
Sets A and B are placed in a simple,
two-party call. The warning tone is
removed.
Set C is disconnected. The warning
tone is removed. Set B rings.
Response
—
Set A receives dial tone and then
enters a conference with Sets A and B.
If configured, a warning tone is
provided to all three parties.
The warning tone is removed. Sets A
and B are placed in a simple, two-party
call.
Set C is disconnected. The warning
tone is removed. Set B rings.