Page 1572 of 1814
Operating parameters
Feature interactions
Feature packaging
Feature implementation
Task summary list
LD 17 – Configure the AT&T interface type.
Prompt
Response
REQ
CHG
TYPE
CFN
ADAN
NEW DCH xx
CTYP
DCHI
MSDL
DNUM
xx
- PORT
xx
553-2901-301 Standard 9.00 January 2002
Software Defined Network Access
SDN can transmit voice, data, or graphics. Analog transmission to 9600 bps
and 56 kbps or 64 kbps clear end-to-end digital data transmission are
supported.
There are no operating parameters associated with this feature.
There are no feature interactions associated with this feature.
This feature is included in base X11 System Software.
The following is a summary of the tasks in this section:
1
LD 17 – Configure the AT&T interface type.
2
LD 16 – Configure a TIE route. Routes defined for access to AT&T
services, such as SDN, must be TIE trunk routes.
Description
Change
Configuration Record
Add a primary D-channel
Card type
Device number: physical port (odd) for D-channel on DCH,
physical card address for MSDL or DDCH.
Port number on MSDL or card