Nortel Meridian Meridian 1 Feature Description And Administration page 1480

Page 1480 of 1814
Feature implementation
Task summary list
LD 17 – Configure the primary D-channel for the NI-2 Basic Call Service.
Prompt Response
REQ NEW
TYPE CFN
ADAN NEW DCH xx
CTYP MSDL
...
553-2901-301 Standard 9.00 January 2002
NI-2 Call By Call Service Selection
All Trunk Busy
This field indicates the increment when all trunks (incoming and outgoing)
on the NI-2 CBC master route becomes busy. For a service route, this field
indicates the increment when the number of calls (both incoming and
outgoing) for the service route has reached its maximum value.
Incoming CBC peg count
This field indicates the incoming peg count for an NI-2 CBC service route.
Outgoing CBC peg count
This field indicates the outgoing peg count for an NI-2 CBC service route.
The following is a summary of the tasks in this section:
1 LD 17 – Configure the primary D-channel for the NI-2 Basic Call
Service.
2 LD 16 – Configure the NI-2 Call By Call Service master route.
3 LD 14 – Define the associated list of trunks (B-channels) that are to be
shared by the NI-2 CBC service routes
4 LD 16 – Configure the NI-2 CBC service routes.
Description
Add new data.
Configuration Record.
Add a primary D-channel where:
xx = 0-63.
Supported only on Multi-purpose Serial Data Link (MSDL)
or Downloadable D-channel cards.