Nortel Meridian Meridian 1 Feature Description And Administration page 1663

VNDN XALLVDNS
xx...x
<CR>
CONF YES
LD 79 – Disable or enable single VDN, or a block of contiguous VDNs.
Prompt Response
REQ DIS
ENL
TYPE VNS
CUST xx
VNDN xx....x
<CR>
LD 79 – Print VNS information for a customer.
The information is output after the customer number is entered in response to the CUST prompt.
Prompt Response
REQ PRT
TYPE VNS
Virtual Network Services
Remove all VNS data blocks.
Remove an individual VDN, or the first VDN of a block of
contiguous VDNs.
You may remove another single VDN, or a block of
contiguous VDNs, by entering <CR> after the VNDN entry.
VNDN is prompted until <CR> is entered. In this case, the
REQ prompt will appear again.
If XALLVDNS is entered, the message REMOVE ALL VDN
BLOCKS? is then output, followed by the CONF prompt.
To confirm the removal of all VDN blocks.
Description
Disable a single VDN or a block of contiguous VDNs
Enable a single VDN or a block of contiguous VDNs
Virtual Network Services.
Customer number.
At least one D-Channel must be configured with USR =
VNS or USR = SHAV and having VNS = customer number.
Individual VDN, or first VDN of a block of contiguous VDNs
to be disabled or enabled.
You may enable or disable another single VDN, or a block of
contiguous VDNs, by entering <CR> after the VNDN entry.
VNDN is prompted until <CR> is entered. In this case, the
REQ prompt will appear again.
Description
Print VDN information.
Virtual Network Services.
International ISDN PRI Feature description and administration
Page 1663 of 1814