Mcdn End To End Transparency; Nms Implementation Using The Qsig Transport - Nortel Meridian Meridian 1 Feature Description And Administration

Page 1224 of 1814
LD 10 – Define an analog (500/2500) set at source and/or target node.
Prompt Response
REQ: NEW
CHG
TYPE: aaaa
TN
l s c u
c u
...
CLS AGTA
...
FTR ACD xxxx 0-N/D zzzz

NMS implementation using the QSIG transport

553-2901-301 Standard 9.00 January 2002

MCDN End to End Transparency

Description
Add new data.
Change existing data.
Type of set.
aaaa = analog (500 or 2500) set.
Terminal Number.
l = loop, s = shelf, c = card, u = unit for Options 51-81C.
c = card, u = unit for Option 11C.
ACD services for analog (500/2500) sets allowed.
ACD feature where:
aaa = ACD.
xxxx = ACD DN.
0-N/D = CLID entry.
zzzz = ACD agent's position ID.
To configure NMS-MC using the QSIG transport, follow these steps:
• Configure an ISDN PRI interface using the QSIG transport or and select
NMS as an MCDN feature in LD 17, or configure an ISDN BRI interface
using the QSIG transport or and select NMS as an MCDN feature in LD
16.
• Configure NMS-MC for a QSIG link:
— Define a CDP (DSC or LSC) or UDP between the two nodes.
— Allow Message Waiting Center access in LD 15.
— Define a Meridian 1 proprietary ACD agent set at source and/or
target node in LD 11.
— Define a Meridian 1 proprietary NMS-MC user set in LD 11.