Nortel Meridian Meridian 1 Feature Description And Administration page 840

Page 840 of 1814
- DES
- USR
- IFC
- - CNTY
...
- DCHL
553-2901-301 Standard 9.00 January 2002
ISDN PRI Central Office Connectivity
0-1 Port number of the NTBK51AA, if the NTBK51AA is
used for D-Channel handling on large systems
(Options 51C-81C).
Port 0 of the NTBK51AA can only be defined to work
with Loop 0 of the NT5D97AA DDP2 card, and Port 1
of the NTBK51AA can only be defined to work with
Loop 1 of the NT5D97AA. This relationship must be
reflected in the BCHL prompt, which follows later
(either 0 or 1 must be entered when specifying the loop
number used by the Backup D-Channel).
1 Port number of the NTBK51BA, for the small system
(Option 11C).
aaa...a Designator.
DES is used to identify the link and can be up to 16
alphanumeric characters: 0-9, and upper case A-Z.
Characters "*" and "#" are not allowed.
PRI This D-Channel is used for Primary Rate only.
APAC Asia Pacific ISDN interface.
HKNG Hong Kong.
MSIA Malaysia.
JAPN Japan.
TCNZ New Zealand.
LOOP ID Primary PRI loop number and interface identifier for the
0-159 (0)-15 D-Channel (Options 51C-81C).
Note: the INBD package 255 must be enabled to allow
this range of entry. If the INBD package is not enabled,
the allowable entry would be the PRI loop number
(0-159 for Options 51C-81C, 1-9 for Option 11C). Also,
the subsequent PRI prompt(s) would not be generated.
LOOP ID Primary PRI loop number and interface identifier for the
1-9 (0)-15 D-Channel (Option 11C).