Nortel Meridian Meridian 1 Feature Description And Administration page 1031

ISDN QSIG/EuroISDN Call Completion Page 1031 of 1814
A PINX (Private Integrated Services Network Exchange) DN must be
configured in the Customer Data Block (LD 15). The PINX DN is used for
routing free notification on the MCDN or DPNSS1 if the EuroISDN network
does not provide a calling number for the service. The DN configured should
be consistent with the type of number plan used. PINX DN is also used for
incoming Direct Inward Dialing (DID) calls in the same manner as Listed
Directory Number 0 (LDN0) is used for a basic call.
Existing limitations, applicable to standalone or network wide Ring Again
operation, apply to CCNR and CCBS on QSIG and CCBS on QSIG and
EuroISDN.
Feature interactions
Access Restrictions
Call Restriction
Trunk Group Access Restrictions
ISDN QSIG/EuroISDN Call Completion does not override Access, Call
Restriction or Trunk Group Access restrictions. When Call Completion is
activated, the second call has the same restrictions as the initial call that
received either no answer or a busy indication.
Advice of Charge for EuroISDN
Advice of Charge applies to the initial and call completion (second call). The
initial call receives the same charging information as a normal busy call. The
call completion receives the same charging information as the first call.
Attendant Consoles
Call Completion requests cannot be directed to or from an Attendant Console.
Automatic Call Distribution
Call Completion requests cannot be directed to or from Automatic Call
Distribution (ACD) Directory Numbers (DNs).
An ACD set that uses a normal DN key (not the ACD key) can activate the
Ring Again key when encountering a busy or no answer situation.
Call Detail Recording
A Call Detail Recording (CDR) is not produced for Call Completion
signaling. The second call receives a CDR as a normal call.
International ISDN PRI Feature description and administration