Nortel Meridian Meridian 1 Feature Description And Administration page 1500

Page 1500 of 1814
Feature interactions
Feature packaging
Feature implementation
Task summary list
LD 17 – Configure the NPI and TON fields.
Prompt Response
REQ CHG
TYPE PARM
...
FCDR NEW
...
553-2901-301 Standard 9.00 January 2002
NPI and TON in CDR
NPI and TON information is lost when system initialization occurs and the
call is then reconstructed. In this case, if the call involves an incoming ISDN
trunk and if the NPI and TON in CDR feature is configured, the NPI field
contains two zeros (00) and the TON field contains one zero (0), regardless
of the NPI and TON sent at call setup.
The NPI and TON in CDR feature does not have any specific interactions
with other features.
The NPI and TON in CDR feature requires the following packages:
• Call Detail Recording (CDR) package 4
• Call Detail Recording on Teletype Machine (CTY) package 5
• Calling Line Identification in Call Detail Recording (CCDR)
package 118
• New Format Call Detail Recording (FCDR) package 234
The following is a summary of the tasks in this section:
1 LD 17 – Configure the NPI and TON fields.
Description
Change existing data.
System parameters.
New Format CDR.
OLD = Old CDR format (default).