Data Administration - Nortel Meridian Meridian 1 Feature Description And Administration

Page 66 of 1814
Prompt Response
<cr>
SREF xx
<cr>
TRSH 0–99
RALM 1–(3)–128
BIPC 0–(2)–128
LFAC 0–(3)–128
BIPV
1–(3)–4
1–(2)–4
SRTK
553-2901-301 Standard 9.00 January 2002

Data administration

Description
Free run mode
No primary or secondary reference source assigned
X preceding the number deletes existing primary reference source
Secondary reference source for clock controller
Prompted only if PREF is not free run
Free run mode
No primary or secondary reference source assigned
X preceding the number deletes existing secondary reference
source
Create or change a PRI threshold set
Enter this number in LD 17 when defining the PRI loop
X preceding number deletes threshold set.
Yellow alarm (remote alarm) 24-hour threshold
Number of remote alarm clear signals received in 24 hours
If the threshold is reached, the PRI must be restored to service
manually
24-hour bit rate violation threshold
If zero is entered, trunks are restored to service automatically
With D2, D3, or D4 framing format, bipolar violation threshold
With ESF, Cyclic Redundancy Check (CRC) threshold
24-hour loss of frame alignment threshold
If zero is entered, trunks are restored to service automatically
Bit rate (bipolar violation and CRC) monitoring limits
Maintenance threshold
Out-of-service threshold
Frame slip tracking monitoring limits