Feature Operation - Nortel Meridian Meridian 1 Feature Description And Administration

Page 966 of 1814
...
DN x..x
- NAME a..a
LD 11 – Configure the name that is to be displayed on the Forwarded-to (diverted) Party's set
Prompt Response
REQ: CHG
TYPE: xxxx
TN l s c u
c u
...
CLS DNDA

Feature operation

553-2901-301 Standard 9.00 January 2002
ISDN QSIG Call Diversion Notification
Directory Number.
Calling Party Name Display in ASCII characters.
Description
Change existing data.
Telephone type, where:
xxxx = SL1, 2006, 2008, 2009, 2016, 2018, 2112, 2216,
2317, 2616 or 3000.
Terminal Number.
For Option 11C.
Dialed Name Display Allowed.
(DNDD)= Dialed Name Display Denied (default).
Note: LD 81 may be used to print counting or listing queries pertaining
to the new Classes of Service, by entering CNT or LST against the REQ
prompt, and the appropriate COS against the FEAT prompt.
Note: LD 83 may be used may be used to print the new Classes of
Service in the TN blocks, by entering TNB against the REQ prompt, and
the appropriate COS against the CLS prompt.
No specific operating procedures are required to use this feature.