Nortel Meridian Meridian 1 Feature Description And Administration page 960

Page 960 of 1814
RCAP
DV1I
DV1O
DV2I
DV2O
DV3I
DV3O
LD 16 – Configure Remote Capability for a route with QSIG Generic Functional Interface.
Prompt Response
REQ CHG
TYPE RDB
CUST xx
ROUT 0 - 511
0-127
...
IFC xxxx
...
553-2901-301 Standard 9.00 January 2002
ISDN QSIG Call Diversion Notification
QSIG SS Call Diversion Notification remote capability.
Configure sending of QSIG Diversion Notification
Information, treatment of Rerouting request and coding of
operations. If coded as Object Identifier, the remote
capability ends with 'O", whereas for Integer Value, the
remote capability ends with 'I'. Only one remote capability is
allowed. Refer to Table 1 for further information.
Diversion information is sent to remote switch.
Diversion information is sent to remote switch.
Rerouting requests from remote switch are processed.
Rerouting requests from remote switch are processed.
Diversion information is sent to remote switch. Rerouting
requests from remote switch are processed.
Diversion information is sent to remote switch.
Rerouting requests from remote switch are processed.
Precede with 'X' to remove capability.
Description
Change existing data.
Route Data Block.
Customer number.
Route Number.
For Option 11C.
QSIG interface type where xxxx is:
ESGF = interface ID for ETSI QSIG with GF capability.
ISGF = Interface ID for ISO with GF capability.