Nortel Meridian Meridian 1 Feature Description And Administration page 1437

Network Force Disconnect operation
Table 98
Post-dial network force disconnect operation for a Meridian Digital telephone
Actions
Sets B and C are involved in a
two-party call.
Set A dials Set B.
Set A presses the FDIS key.
OR
If Set A initiates a break-in
operation first (either pre-dial or
post-dial)
Set A presses the FDIS key.
Network Break-in and Force Disconnect
Post-dial network force disconnect operation for Meridian Digital
telephones
Table 98 shows the post-dial network force disconnect operation for a
Meridian Digital telephone.
Response
—
Set A receives a busy tone.
If configured, a single warning tone is
provided and Set C is disconnected.
Sets A and B are placed in a simple,
two-party call.
Set A enters into a conference with
Sets B and C. If configured, warning
tone is provided.
Set C is disconnected and the warning
tone is removed. Sets A and B are
placed in a simple, two-party call.
Pre-dial network force disconnect operation for Meridian Digital
telephones
Table 99 shows the pre-dial network force disconnect operation for a
Meridian Digital telephone.
International ISDN PRI Feature description and administration
Page 1437 of 1814
Set A PONW
lamp status
—
—
The FDIS key
lamp remains lit
during the single
warning tone
period. It goes
dark when Set C
is disconnected.
The PONW lamp
is lit.
The PONW lamp
goes dark.