Nortel Meridian Meridian 1 Feature Description And Administration page 841

- PRI
- PRI
LD 17 – Configure the Bearer Capability for the Asia Pacific connectivity D-Channel.
Prompt Response
REQ CHG
TYPE PARM
...
- BCAP
a...a
...
ISDN PRI Central Office Connectivity
LOOP ID Secondary PRI loop number and interface identifier
0-159 (0)-15 (Options 51C-81C).
Prompted if INBD package 255 is enabled.
The values entered must be different than those
entered for the loop number and interface identifier at
the DCHL prompt.
The PRI prompt is generated until <CR> is entered.
LOOP ID Secondary PRI loop number and interface identifier
1-9 (0)-15 (Option 11C).
Prompted if INBD package 255 is enabled.
The values entered must be different than those
entered for the loop number and interface identifier at
the DCHL prompt.
<CR>
Description
Change existing data.
Make changes to system parameters.
Bearer Capability.
a...a = SPEECH (the default) or 3.1 Khz data.
International ISDN PRI Feature description and administration
Page 841 of 1814