Nortel Meridian Meridian 1 Feature Description And Administration page 1101

Figure 89
MCDN Name Display features over a QSIG/MCDN link
ISDN QSIG Name Display Enhancement
For MCDN, the RCAP prompt is used to configure the Network Name
Display (ND) method (either ND1, ND2, or ND3) for the associated
D-Channel. ND3 ensures the same level of service between the MCDN Name
Display and QSIG Name Display supplementary services. Refer to Figure 89.
QSIG Call Diversion Notification
Calling Name
A QGIG Call Diversion occurs to a station. After the Diversion Notification
Information is received at the diverted-to node, the station's display will be
updated with the calling name information, if it has a Class of Service of
Dialed Name Display Denied (CLS = DNDD in LD 10 or LD 11). If the set
has a Class of Service of Dialed Name Display Allowed (CLS = DNDA in
LD 10 or LD 11), then another name, or none, is displayed on the set.
International ISDN PRI Feature description and administration
Page 1101 of 1814