Nortel Meridian Meridian 1 Feature Description And Administration page 1201

Feature implementation
Task summary list
LD 86 – Configure the MCDN Alternate Routing options.
Prompt Response
REQ CHG
CUST xx
FEAT RLB
RLI xxx
• UDP requires either Network Alternate Route Selection (NARS)
package 58 or Basic Alternate Route Selection (BARS) package 57
• Digital Trunk Interface (DTI) package 75
• ISDN Signaling (ISDN) package 145
• 1.5 Mb Primary Rate Access (PRA) package 146, or
• 2.0 Mb Primary Rate Interface (PRI2) package 154, or
• International Primary Rate Interface (IPRA) package 202, or
• ISDN Signaling Link Interface (ISL) package 147
The following is a summary of the tasks in this section:
1 LD 86 – Configure the MCDN Alternate Routing options.
Note: To ensure that MCDN Alternate Routing occurs for all nodes in a
system, define all nodes as SBOC = RRA. Conversely, to prevent
MCDN Alternate Routing from occurring on any nodes, define all nodes
as SBOC = NRR.
Description
Change existing data.
Customer number, as configured in LD 15.
xx = 0-99 for Options 51C-81C.
xx = 0-31 for Option 11C.
Configure the Route List as a feature.
Route List Index to be accessed.
xxx = 1-127 if a Coordinated Dialing Plan or Basic Alternate
Route Selection is used.
xxx = 1-255 if Network Alternate Route Selection is
configured.
xxx = 0-999 if the Flexible Numbering Plan is configured.
International ISDN PRI Feature description and administration
MCDN Alternate Routing Page 1201 of 1814