Nortel Meridian Meridian 1 Feature Description And Administration page 1695

Attendant and Network-wide Remote Call Forward
This feature allows the configuration of Call Forward from an Attendant
Console and a remote set across a Meridian Customer Defined Network
(MCDN). For an ISDN BRI terminal, Remote Call Forward is allowed from
a set, or from an Attendant Console, but not from a BRI set either locally or
network wide. When Call Forward is activated, it is assumed that the Call
Forward for the BRI set is voice, not data.
Internal Call Forward
An ISDN BRI terminal cannot activate the internal Call Forward feature.
Call Forward/Hunt Override via Flexible Feature Code
This feature allows all attendants and sets with Call Forward/Hunt Override
Allowed (CFHA) Class of Service to override Call Forward All Calls
(CFAC). Since an ISDN BRI terminal cannot access Flexible Feature Codes,
it cannot override CFAC on other sets. However, an ISDN BRI set's Call
Forward All Calls can be overridden by a set having CFHA Class of Service
or by an attendant in both standalone and network environments.
Call Forward Reminder Tone
The Call Forward Reminder Tone is supported on ISDN BRI sets that have
the Call Forward All Calls feature active.
Call Forward Confirmation Tone
During activation or deactivation of Call Forward from a BRI terminal, a Call
Forward confirmation tone is not provided to the BRI terminal. Instead,
confirmation is done by sending an ISDN BRI message to the terminal.
Call Forward Save on SYSLOAD
Call Forward Save on SYSLOAD is not supported for ISDN BRI terminals.
Feature packaging
There is no new feature package introduced by this feature. However, the
following feature packages are required for ISDN BRI:
• Basic Rate Interface (BRI) package 216
• Basic Rate Interface line application (235)
• Meridian 1 Extended Peripheral Equipment (XPE) package 203.
International ISDN PRI Feature description and administration
ISDN BRI features Page 1695 of 1814