Nortel Meridian Meridian 1 Feature Description And Administration page 1439

Network Break-in and Force Disconnect
Table 100
Post-dial network force disconnect operation for an analog (500/2500
type) telephone
Actions
Sets B and C are involved in a
two-party call.
Set A dials Set B.
Set A presses the Flash key
and then dials the FDIS FFC
code.
OR
If Set A initiates a break-in
operation first (either predial or
postdial)
Set A presses the Flash key
and then dials the FDIS FFC.
International ISDN PRI Feature description and administration
Response
—
Set A receives a busy tone.
If configured, a single warning tone is
provided and Set C is disconnected.
Sets A and B are placed in a simple,
two-party call.
Set A enters into a conference with
Sets B and C. If configured, a warning
tone is provided.
Set C is disconnected and the warning
tone is removed. Sets A and B are
placed in a simple, two-party call.
Page 1439 of 1814