Nortel Meridian Meridian 1 Feature Description And Administration page 1414

Page 1414 of 1814
553-2901-301 Standard 9.00 January 2002
Network Time Synchronization
Query Time Delta.
The command format is:
INPUT OUTPUT
.TDEL.TDEL (SIGN) (HR) (MIN)
Example:
.TDEL.TDEL 0 01 30
Set Time Delta.
The command format is:
.SDEL (sign) (hr) (min)
where:
sign – is the time-adjust factor direction indicator which may be:
0 — to indicate the Master switch is behind in time.
or
1 — to indicate the Master switch is ahead in time.
hr – is the number of hours the time must be adjusted by and may
be any number from 0 to 23, and
min – is the number of minutes the time must be adjusted by and
may be any number from 0 to 59.
0 is the default for the SDEL parameters.
Example:
.SDEL 1 23 00
Note: The hour and minute entries are two digits. The minute entry is
defaulted to zero if not entered. "1" identifies a positive delta (Master is
ahead in time), "0" identifies a negative delta.