Isdn Basic Rate Interface Connected Line Presentation/Restriction - Nortel Meridian Meridian 1 Feature Description And Administration

...
DN xxxx (0)-N
...
FEAT CFXA
SSRV_NI VCFA 15 16
VCFD 15 16
DCFA 16 26
DCFD 17 27
...
Feature operation
ISDN Basic Rate Interface Connected Line
Presentation/Restriction
Feature description
xxxx = DN to be associated with the TSP.
(0)-N = CLID entry, with N = CLID SIZE-1 (SIZE defined in
LD 15).
Allow Call Forward External for the DN.
Feature identifiers for Call Forward voice activation.
Feature identifiers for Call Forward voice deactivation.
Feature identifiers for Call Forward data activation.
Feature identifiers for Call Forward data deactivation.
No specific operating procedures are required to use this feature.
ISDN Basic Rate Interface Connected Line Presentation/Restriction is a
supplementary service that enables the Meridian 1 to either allow or restrict
the presentation of a connected party's ISDN number and sub-address on the
display of an ISDN BRI terminal. The presentation of a ISDN number and
sub-address to the calling party occurs when the connected party's ISDN BRI
terminal answers the call. In addition to the BRI terminal, this service can be
applied to Meridian 1 proprietary and Analog (500/2500 type) sets.
The Connected Line Presentation (COLP) service applies to the calling party.
COLP allows the presentation of the connected party's ISDN number and
sub-address to the calling party.
International ISDN PRI Feature description and administration
ISDN BRI features Page 1697 of 1814